In the previous article, Outsole Attaching Operations in Outsole Process, we covered the accurate positioning and attachment of outsole components within the Stock Fitting process. Once the outsole has been attached, the assembly immediately moves to the pressing operation. Outsole…
In the previous article, Drying and Activation Operations in Outsole Process, we discussed how adhesive-coated components are dried and activated to achieve the required tack before bonding. Once activation is complete, the adhesive surfaces remain effective only for a limited…
In the previous blog, Secondary Cement Coating Operations in Outsole Process, we covered the application of the second adhesive coat on the outsole. Once this coating is completed, the outsole must pass through controlled drying and activation before it can…
In the previous blog, Primary Cement Coating Operations in Outsole Process, we covered the fundamentals of adhesive preparation, surface condition, application technique, drying, and general quality controls. These principles also apply to the secondary coat and should be followed according…
After Priming Operations in Outsole Process, the next important stage in the Outsole (Stock Fitting) Assembly Series is Primary Cement Coating. Priming prepares the outsole surface for bonding, but primer alone does not create the final adhesive bond. Primary cement…
Building a Strong Chemical Foundation for Reliable Bonding Modern footwear manufacturing demands consistently high bond strength between the upper and outsole. Although adhesive selection receives considerable attention, many bonding failures originate long before cement is applied. One of the most…
In the previous blog, Kitting Operations in Outsole Process, we discussed how all required outsole components are collected, verified, and organized into complete production kits before manufacturing begins. Once each kit is approved, the next critical step is feeding it…
In the previous blog, Kitting Operations in Outsole Process, we discussed how paints enhance outsole appearance by adding decorative colors, branding, and protective finishes. Painting provides flexibility for creating attractive outsole designs while maintaining production efficiency. The next decorative operation…
In the previous blog, Painting Operations in Outsole Process, we explored how decorative foil enhances the appearance and value of footwear components before assembly. Once decorative processes are completed and approved, the next step is Kitting Operations, where all outsole…
In the previous blog, Wheeling Operations in Outsole Process, we explained how wheeling removes flash and smooths outsole edges before finishing. Once the outsole is clean and dimensionally correct, the next operation is painting. This process enhances the outsole’s appearance…
